Incline Press Machine: How to Use It, Muscles Worked and Best Seat Setup
How to set up and use the incline press machine, which muscles it works and what research says about building the upper chest, with a video, common mistakes and a sets and reps guide.
Published: · Reviewed by İmge Gürsoy, graduate nurse
Short answer: The incline press machine is a seated chest machine that has you press the handles forward and upward from a reclined back pad. It mainly works the upper chest (the clavicular head of the pectoralis major), with the front shoulders and triceps helping. To use it, set the seat so the handles line up with your upper chest, keep your back and shoulder blades against the pad, press with your elbows at roughly 45 to 60 degrees from your body, stop just short of locking out and lower the handles over 2 to 3 seconds. Research shows that incline pressing works the upper chest more than flat pressing, while angles steeper than about 45 degrees shift more of the work to the front shoulders. Two sessions a week of 3 to 4 sets of 8 to 12 reps is a solid starting point.
Most chest workouts are built around the flat bench press and the flat chest press machine. They are great for the middle and lower chest, but the upper chest often falls behind, which leaves the chest looking flat near the collarbones. The incline press machine is one of the easiest ways to fix that. You do not need a spotter, you do not have to balance a bar and you can push close to failure safely. In this guide we show you how to set the machine up, how to perform every rep correctly, what the research says about incline pressing and the upper chest, and how to add it to your training.
- 1. What Is an Incline Press Machine?
- 2. Incline Press Machine Muscles Worked
- 3. How to Set Up the Machine: Seat Height and Grip
- 4. How to Use the Incline Chest Press Machine
- 5. Video Demonstration
- 6. Does Incline Pressing Build More Upper Chest?
- 7. Incline Press Machine vs Incline Bench Press vs Dumbbells
- 8. Common Mistakes and How to Fix Them
- 9. Who Should Use It and Who Should Be Careful
- 10. Sets, Reps and How to Progress
- 11. Frequently Asked Questions
1. What Is an Incline Press Machine?
An incline press machine, also called an incline chest press machine, is the machine version of the incline bench press. You sit with your back against an angled pad and press two handles forward and upward. Because the handles travel along a fixed path, you do not need to stabilise a barbell or a pair of dumbbells, so you can focus entirely on pushing.
You will find two types in most gyms. On a plate loaded machine, like the one in our video and the well known Hammer Strength incline press, you load weight plates onto horns next to each arm. On a selectorized machine you choose the weight from a stack with a pin. Many plate loaded machines are iso-lateral, which means each arm moves independently, so your stronger side cannot cover for your weaker side.
Anatomy2. Incline Press Machine Muscles Worked
| Muscle | Role in the movement |
|---|---|
| Upper chest (clavicular head of the pectoralis major) | Primary target. Brings the arm forward and up; its share rises as the incline increases. |
| Middle and lower chest (sternocostal head) | Assists. Works hardest in flat pressing. |
| Front shoulders (anterior deltoids) | Raise the arm forward; take on more of the work as the incline gets steeper. |
| Triceps | Straighten the elbow to finish each press. |
| Shoulder blade muscles | Hold the shoulder blades against the pad and keep the shoulder joint stable. |
Research finding: Trebs and colleagues (2010) had 15 healthy men chest press at 70% of their one rep max on benches set to 0 (flat), 28, 44 and 56 degrees. Upper chest activity was significantly higher at 44 degrees than at 0 and 28 degrees. The middle and lower chest was most active on the flat bench, and front shoulder activity was higher at every incline than on the flat bench.
Research finding: Coratella and colleagues (2020) compared the flat, 45 degree incline and 15 degree decline bench press with the flat chest press machine in 10 competitive bodybuilders. The upper chest was most active in the 45 degree incline bench press and least active on the flat chest press machine.
The practical takeaway: if your chest training is only flat pressing, adding an incline press is the simplest way to give the upper chest more work. Both matter, because the flat press still trains the middle and lower chest best.
Before you start3. How to Set Up the Machine: Seat Height and Grip
- 1. Seat height. When you sit down, the handles should line up with your upper chest, just below your collarbones. If the handles sit above your shoulders, raise the seat. If they sit at the middle of your chest, lower it.
- 2. Back and hips. Sit all the way back and keep your whole back against the pad. A small natural arch in your lower back is fine, but your hips should stay on the seat.
- 3. Feet. Plant your feet flat on the floor or on the footrest. Solid feet stop your body from sliding as you press.
- 4. Grip. If your machine has two sets of handles, the horizontal grip (palms facing forward) tends to target the chest more, while the neutral grip (palms facing each other) is usually easier on the shoulders. Grip the handles firmly and keep your wrists straight.
- 5. Starting weight. For your first set, choose a weight you could lift for 12 to 15 easy reps and use it to learn the movement. On plate loaded machines the arms carry weight of their own, so the same plates can feel different from one machine to the next.
Safety note: On plate loaded machines, load both sides evenly. At the end of a set, guide the arms back to the starting position under control. If the arms rest on a stop at the bottom, do not stand up until the weight is resting there.
4. How to Use the Incline Chest Press Machine
- 1. Get into position. Sit down, press your back into the pad and grip the handles at upper chest height.
- 2. Set your shoulder blades. Pull your shoulder blades slightly back and down and press them into the pad. This keeps your shoulders in a safe position and helps the chest do the work.
- 3. Set your elbow angle. Keep your elbows at about 45 to 60 degrees from your body: not flared straight out to the sides and not tucked tight against your ribs.
- 4. Press. Breathe out and press the handles forward and up until your arms are almost straight. Do not let your shoulders rise towards your ears.
- 5. Do not lock out. Stop just before your elbows lock, squeeze your chest and pause for a moment.
- 6. Lower with control. Breathe in and bring the handles back over 2 to 3 seconds until you feel a light stretch across your chest. Start the next rep before the weight touches the stop.
The movement in one line: Handles at upper chest height, back and shoulder blades on the pad, elbows 45 to 60 degrees from the body, shoulders down, press forward and up, no lockout, 2 to 3 second lowering.
5. Video Demonstration
The video shows the movement on a plate loaded incline press machine. Watch for three things: the handles start at upper chest height, the back stays on the pad for the whole set and the arms come back under control without locking out at the top.
What the research says6. Does Incline Pressing Build More Upper Chest?
If you want to know how to build your upper chest, the angle you press at matters. The incline changes which part of the chest does the most work, but steeper is not always better.
Research finding: Rodríguez-Ridao and colleagues (2020) had 30 trained adults bench press at 60% of their one rep max on benches set to 0, 15, 30, 45 and 60 degrees. Upper chest activity peaked at 30 degrees, while the middle and lower chest were most active on the flat bench. Above 45 degrees, front shoulder activity rose sharply and the chest's contribution fell.
Research finding: Chaves and colleagues (2020) split 47 untrained young men into flat bench, incline bench and combined groups for 8 weeks, training once a week with the same number of sets. Strength gains were similar in all three groups. Upper chest muscle thickness, measured at the second rib space, increased by 0.62 cm more in the incline group than in the flat group and by 0.50 cm more than in the combined group.
Together these findings show that incline pressing both works the upper chest harder and can lead to more growth there. The sweet spot is roughly 30 to 45 degrees. Most incline press machines have a fixed angle, so the most practical way to use the angle well is to set the seat so the handles line up with your upper chest.
Comparison7. Incline Press Machine vs Incline Bench Press vs Dumbbells
Research finding: Haugen and colleagues (2023) pooled 13 studies with 1,016 participants comparing free weight and machine training. In direct comparisons they found no difference in strength or muscle growth between the two. Strength gains were specific to the equipment used: people got better at what they trained with.
Research finding: Hernández-Belmonte and colleagues (2023) had 38 resistance trained men train for 8 weeks with either free weights or machines. Strength and muscle growth, including the chest, were similar in both groups, and joint discomfort decreased in both.
| Exercise | Main advantage | Best for |
|---|---|---|
| Incline press machine | Fixed path, quick setup, no spotter needed; safe to train close to failure | Beginners, people who train alone, sensitive shoulders |
| Incline barbell bench press | Heaviest loading; carries over to barbell strength | Lifters with barbell strength goals |
| Incline dumbbell press | Each arm works on its own; larger range of motion | Fixing left to right imbalances, home and gym |
| Smith machine incline press | Bar on a fixed rail with an adjustable bench angle | Choosing your own incline angle |
In short, the machine is not a lesser option than free weights. What matters most is choosing equipment you can use consistently and keep progressing on. You can also combine the incline press machine and dumbbells in the same program. To place it in your week, see our sample push pull legs and upper lower workouts.
Watch out8. Common Mistakes and How to Fix Them
| Mistake | Why it is a problem | Fix |
|---|---|---|
| Seat too low | Handles sit above the shoulders and the front shoulders take over | Raise the seat until the handles reach upper chest height |
| Seat too high | The press turns into a flat press and the upper chest does less | Lower the seat |
| Elbows flared straight out | More stress on the shoulder joint | Keep the elbows 45 to 60 degrees from the body |
| Shrugging the shoulders | Neck and traps take over and the chest works less | Pull the shoulder blades back and down into the pad |
| Hips lifting off the seat | Reduces the incline and strains the lower back | Keep your hips down and your back on the pad |
| Dropping the weight | You lose the lowering phase, where the muscle works hard | Lower over 2 to 3 seconds |
| Locking the elbows | Load shifts from the muscles to the joints | Stop just short of full extension |
9. Who Should Use It and Who Should Be Careful
A good choice if you
- Want a fuller, firmer upper chest, whether you are a woman or a man
- Are new to the gym and find balancing a barbell hard
- Train alone and want to go heavy without a spotter
- Have a strength difference between your left and right side (on iso-lateral machines)
Take care or choose an alternative if you
- Have shoulder impingement or shoulder pain: start with a neutral grip and a shorter range of motion, and see a physiotherapist if it hurts
- Have had shoulder or elbow surgery: add it only with your doctor's approval
- Have high blood pressure: do not hold your breath, breathe out as you press and check with your doctor
For women, and especially women over 40, chest pressing builds upper body strength that makes everyday tasks easier. If you are just starting out, our strength training guide for women over 40 shows how to fit pressing into a full beginner program.
Programming10. Sets, Reps and How to Progress
| Variable | Recommendation |
|---|---|
| Sets | 3 to 4 |
| Reps | 8 to 12 |
| Sessions per week | 2 |
| Lowering | 2 to 3 seconds |
Research finding: Schoenfeld and colleagues (2016) found in a meta-analysis that, when total work was equal, training a muscle twice a week led to more growth than training it once a week.
Research finding: Schoenfeld and colleagues (2017) found that muscle growth increased as weekly sets per muscle increased, with each extra weekly set adding about 0.37 percentage points of growth on average.
Research finding: Schoenfeld and colleagues (2017) found that when sets were taken to failure, light and heavy loads produced similar muscle growth, while heavy loads produced greater gains in maximal strength.
| Level | Sample plan |
|---|---|
| Beginner | 3 sets of 10 to 12 reps, twice a week; the last 2 to 3 reps should feel hard but your form should not break |
| Intermediate | 3 to 4 sets of 8 to 12 reps; once you can hit the top of the range on every set, add a small amount of weight |
| Advanced | 4 sets; one day heavy with 6 to 8 reps, the other lighter with 12 to 15 reps |
A sample upper body day could include the incline press machine, a flat chest press or bench press, a row, a shoulder press and a chest fly. If your goal is to lose fat and build muscle at the same time, pair this with our body recomposition diet guide. If you look slim in clothes but feel soft, read our guide to skinny fat.
Want a chest and upper body program built around your goal and the machines in your gym? At Fitinsane, our founders write your workout and meal plans, follow your progress with daily check-ins and weekly measurements, and answer your questions within 12 hours. Plans work at home or in the gym.
11. Frequently Asked Questions
How do you use the incline press machine?
Set the seat so the handles line up with your upper chest, sit with your back and shoulder blades against the pad, and press the handles forward and up with your elbows about 45 to 60 degrees from your body. Stop just short of locking your elbows and lower the handles over 2 to 3 seconds.
What muscles does the incline press machine work?
It mainly works the upper chest (the clavicular head of the pectoralis major). The front shoulders and triceps assist, and the middle and lower chest also contribute.
How high should the seat be on an incline press machine?
High enough that the handles line up with your upper chest, just below your collarbones. Raise the seat if the handles sit above your shoulders and lower it if they sit at the middle of your chest.
Is the incline press machine good for the upper chest?
Yes. Studies show incline pressing activates the upper chest more than flat pressing, and an 8-week study found greater upper chest muscle thickness gains with incline pressing than with flat pressing.
Is the incline press machine better than the incline bench press?
For muscle growth there is no meaningful difference; research comparing machines and free weights found similar results. The machine is easier and safer to set up and push hard alone, while the barbell is better if barbell strength is your goal. You can use both.
What is the best incline angle for the upper chest?
About 30 to 45 degrees. In one study upper chest activity peaked at 30 degrees, and above 45 degrees the front shoulders took over more of the work.
How much weight should I use on the incline press machine?
There is no fixed number, and the same plates can feel different on different machines. Choose a weight that makes the last 1 to 3 reps of your target range hard without breaking form, and add weight once you can hit the top of the range on every set.
Does the incline chest press hurt your shoulders?
Not usually when it is set up correctly. Shoulder pain is most often caused by a seat that is too low, elbows flared straight out or shrugged shoulders. Try a neutral grip and a shorter range of motion, and stop and see a physiotherapist if the pain continues.
Should women do the incline chest press?
Yes. It builds upper body strength and firms the chest muscles under the breast tissue. Exercise does not change breast tissue itself, which is mostly fat and glandular tissue, but a stronger upper chest can make the upper body look firmer.
What is the difference between the incline press machine and the chest press machine?
The chest press machine pushes straight forward and works the middle and lower chest more. The incline press machine pushes forward and up and works the upper chest more. In one study the upper chest was least active on the flat chest press machine, so using both covers the whole chest.
- Trebs AA, Brandenburg JP, Pitney WA. An electromyography analysis of 3 muscles surrounding the shoulder joint during the performance of a chest press exercise at several angles. J Strength Cond Res. 2010;24(7):1925-1930. PubMed 20512064
- Rodríguez-Ridao D, Antequera-Vique JA, Martín-Fuentes I, Muyor JM. Effect of five bench inclinations on the electromyographic activity of the pectoralis major, anterior deltoid, and triceps brachii during the bench press exercise. Int J Environ Res Public Health. 2020;17(19):7339. PubMed 33049982
- Coratella G, Tornatore G, Longo S, Esposito F, Cè E. Specific prime movers' excitation during free-weight bench press variations and chest press machine in competitive bodybuilders. Eur J Sport Sci. 2020;20(5):571-579. PubMed 31397215
- Chaves SFN, Rocha-Júnior VA, Encarnação IGA, et al. Effects of horizontal and incline bench press on neuromuscular adaptations in untrained young men. Int J Exerc Sci. 2020;13(6):859-872. PubMed 32922646
- Haugen ME, Vårvik FT, Larsen S, Haugen AS, van den Tillaar R, Bjørnsen T. Effect of free-weight vs. machine-based strength training on maximal strength, hypertrophy and jump performance: a systematic review and meta-analysis. BMC Sports Sci Med Rehabil. 2023;15(1):103. PubMed 37582807
- Hernández-Belmonte A, Martínez-Cava A, Buendía-Romero Á, et al. Free-weight and machine-based training are equally effective on strength and hypertrophy: challenging a traditional myth. Med Sci Sports Exerc. 2023;55(12):2316-2327. PubMed 37535335
- Schoenfeld BJ, Ogborn D, Krieger JW. Effects of resistance training frequency on measures of muscle hypertrophy: a systematic review and meta-analysis. Sports Med. 2016;46(11):1689-1697. PubMed 27102172
- Schoenfeld BJ, Ogborn D, Krieger JW. Dose-response relationship between weekly resistance training volume and increases in muscle mass: a systematic review and meta-analysis. J Sports Sci. 2017;35(11):1073-1082. PubMed 27433992
- Schoenfeld BJ, Grgic J, Ogborn D, Krieger JW. Strength and hypertrophy adaptations between low- vs. high-load resistance training: a systematic review and meta-analysis. J Strength Cond Res. 2017;31(12):3508-3523. PubMed 28834797
Written by Doğukan Gürsoy, energy systems engineer and fitness coach · Reviewed by İmge Gürsoy, graduate nurse, Pilates and fitness instructor. They are the founders of Fitinsane and have coached more than 5,000 clients online since 2019. This guide is for general information and does not replace advice from your doctor.
